Skip to main content
innovative RC products
fast delivery
96 years Robbe

  • Model Monsun V2 almost ready to fly prefabricated
  • painted GRP/CfK fuselage with built-in Ro-Power Torque 3526-870 motor and two Robbe FS-277 servos
  • ready-covered, Styro/GfK/Abachi wing with four built-in Robbe FS-277 servos
  • ready Oracover covered, removable T-tail made of balsa
  • aluminum spinner 38mm and CfK propeller 12x8"
  • small parts (rudder horns, linkages, clevises, covers, etc.), but already completely installed
  • Assembly instructions in German/English/French


Wing-span (mm): 3000
Flight weight approx. (g): 2950
Control: H,S,Q,M,WK
Length (mm): 1480
Manufacturer: Robbe Modellsport
Fuselage: Carbon/FiberGlass
Wings: Styro/Fiberglass/Abachi
Rec. engine: Ro-Power Torque 3526-870kv
Rec. Battery: 4S/4200mAh LiXX
Version: PNP - PLUG N PLAY
Airfoil: HQ 2,5/9
Flight Skill: Advanced
Build Skill: Beginners
Drive Type: Electric

The MONSUN V2 is the successor and the further development of the famous MONSUN. It is a thermal and all-round glider in the compact 3m class with 4-flap wing. The T-tail is hinged backlash-free with a directly installed servo.
The PNP version has servos already installed, electrical connector and original multilocks as wing locks.
The flight characteristics are very good-natured. The MONSUN V2 can be flown as a slow thermal glider or as an all-rounder.
The ready-covered wings are constructed of styro core, glass fiber layers, abachi planking and a carbon fiber reinforced spar. The ratio of weight and strength has been optimally achieved.

The MONSUN V2 is suitable for advanced model pilots.

Features:
  • two-part, ready Oracovered Styro/GfK/Abachi surface with CfK connection
  • continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
  • built-in digital Robbe servos FS-277 with ball bearings and metal gearbox (PNP only)
  • ready-made wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
  • ready ironed rudder flaps with mounted rudder horns
  • painted GRP fuselage with built-in wooden formers and CfK reinforcements
  • powerful Ro-Power Torque 3526 870 K/V outrunner, optimized for 4S (PNP only)
  • large canopy for easy battery change and RC installation
  • ready hinged rudder flaps
  • prefabricated rudder linkages with linkage parts from German production
  • pre-cut servo well and linkage covers
  • anodized 38mm aluminum spinner with straight center section (PNP only)
  • high-strength carbon fiber airscrew 12x8" (PNP only)
  • modern, highly visible design


Das Produkt Monsun V2 PNP Styro/GfK/Abachi von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3000 sowie ein Gewicht von 2950. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als PNP - PLUG N PLAY ausgeführt . Wir empfehlen einen 4S/4200mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

Robbe Modellsport Monsun V2 PNP Styro/GfK/Abachi

Product number: 2664

€749.99*

Not in stock. Available in approx. 2 to 6 months.

Privacy