Robbe Modellsport ARCUS II NIGHT PNP WITH LED LIGHTS
Product number:
2650
- Almost completely assembled model aircraft in foamed construction method
- LED model lighting for fuselage, wings and tail units
- Foamed fuselage, wing and tail unit
- 4 pre-assembled servos for control surfaces
- Pre-assembled brushless controller 20A 2-3s
- Pre-assembled brushless motor 28x30mm 1100KV
- Carbon wing tube for wings
- Small parts for assembly
- Assembly instructions in German/English/French language
| Wing-span (mm): | 1840 |
|---|---|
| Flight weight approx. (g): | 850 |
| Control: | H,S,Q,M,(WK) |
| Manufacturer: | Robbe |
| Fuselage: | EPO |
| Wings: | EPO |
| Rec. engine: | BL 28x30 1.100KV |
| Rec. Battery: | 3S/1300mAh LiXX |
| Version: | PNP - PLUG N PLAY |
| Flight Skill: | Beginners |
| Build Skill: | Beginners |
| Drive Type: | Electric |
Whether you are an ambitious beginner or an advanced model pilot, the Arcus II is the right choice when looking for a powerful and compact glider with electric propulsion. Whether fast or slow, agile or calm, powered or gliding, with this model you always have the right all-rounder in action. The model is controlled via three axes. Thanks to its powerful drive set, the Arcus II has enough power for climbing and then gliding in good thermals.
Despite its wingspan of 1,840 mm, it can be easily transported thanks to the divisible wing. The model comes with four mounted servos for aileron, rudder and elevator as well as a mounted drive set. CFRP reinforcements in the fuselage and wings, as well as the undercarriage and two plastic protectors for the fuselage complete the scope of delivery.
The model can be retrofitted with flaps in no time at all. The large ailerons already have an embossed dividing line for this retrofit, as well as the mounting points for the additional rudder horns. The wings are equipped with cable ducts for the additional servos. Thus only the available retrofit set as well as two further 8 - 9 g servos, a suitable adhesive and of course a free channel at the remote control/receiver are needed. Of course, the installation is described in the illustrated building instructions.
Das Produkt ARCUS II NIGHT PNP MIT LED BELEUCHTUNG von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 1840 sowie ein Gewicht von 850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,(WK). Das Modell ist als PNP - PLUG N PLAY ausgeführt . Wir empfehlen einen 3S/1300mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
Despite its wingspan of 1,840 mm, it can be easily transported thanks to the divisible wing. The model comes with four mounted servos for aileron, rudder and elevator as well as a mounted drive set. CFRP reinforcements in the fuselage and wings, as well as the undercarriage and two plastic protectors for the fuselage complete the scope of delivery.
The model can be retrofitted with flaps in no time at all. The large ailerons already have an embossed dividing line for this retrofit, as well as the mounting points for the additional rudder horns. The wings are equipped with cable ducts for the additional servos. Thus only the available retrofit set as well as two further 8 - 9 g servos, a suitable adhesive and of course a free channel at the remote control/receiver are needed. Of course, the installation is described in the illustrated building instructions.
Das Produkt ARCUS II NIGHT PNP MIT LED BELEUCHTUNG von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 1840 sowie ein Gewicht von 850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,(WK). Das Modell ist als PNP - PLUG N PLAY ausgeführt . Wir empfehlen einen 3S/1300mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]