Skip to main content
innovative RC products
fast delivery
96 years Robbe

- Model CALIMA ARF, ready covered with Oracover
- lacquered GfK/CfK fuselage
- Elevator made of balsa with CfK/magnet plug connection
- Round steel plug for main wing and extension wing
- Small parts (rudder horns, rods, fork heads, covers, etc.)
- Instructions in German/English/French

Wing-span (mm): 3800
Flight weight approx. (g): 4700
Control: H,S,Q,M,WK
Length (mm): 1630
Manufacturer: Robbe
Fuselage: GFK
Wings: Styro/Abachi
Rec. engine: RO-POWER TORQUE 4226-570
Rec. Battery: 4-5S/4000-5000mAh LiXX
Version: ARF - ALMOST READY TO FLY
Airfoil: HQ 2.0/10
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

The CALIMA is the new thermal and all-round giant at Robbe. It has various attachable wing- and tiplets and is therefore easily variable in its wingspan. It can therefore be adapted to different conditions and requirements of the pilot. The pendulum elevator is simply held in place by magnets on the fuselage. The PNP version comes with pre-installed servos, electrical connectors and original Multilocks for wing protection.
The flight characteristics are extremely good-natured. The CALIMA can be used as a slow thermal glider or as an all-rounder to move a little faster.
The fully covered wings are constructed of a styro core, glass fibre layers, Abachi planking and a carbon fibre reinforced spar. The ratio of weight to strength has been optimally achieved.
The CALIMA is suitable for beginners as well as for advanced model pilots.

Features:
  • four-part, ready Oracover covered Styro/GfK/Abachi wing with steel wingjoiner
  • continuous sandwich beam (carbon-pine-carbon) for maximum bending stiffness
  • built-in digital Robbe servos with ball bearings and solid metal gearbox (PNP only)
  • ready wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
  • ready ironed rudder flaps with mounted rudder horns
  • lacquered FRP fuselage with built-in wooden frames and carbon reinforcements
  • powerful Ro-Power 3522 1100 K/V outrunner, optimized for 4S (PNP only)
  • large canopy for easy battery replacement
  • ready hinged rudder
  • prefabricated rudder linkage with articulated parts from German production
  • ready-cut servo shaft and linkage covers
  • anodised aluminium spinner with straight centre section (PNP only)
  • high-strength carbon fibre propeller 14x8" (PNP only)
  • modern, highly visible design


Das Produkt CALIMA ARF HOCHLEISTUNGSSEGLER MIT von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3800 sowie ein Gewicht von 4700. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 4-5S/4000-5000mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport CALIMA ARF HIGH-PERFORMANCE GLIDER WITH 4-FLAP WING

Product number: 2639

€729.99*

No longer available

Privacy

- Model CALIMA ARF, ready covered with Oracover
- lacquered GfK/CfK fuselage
- Elevator made of balsa with CfK/magnet plug connection
- Round steel plug for main wing and extension wing
- Small parts (rudder horns, rods, fork heads, covers, etc.)
- Instructions in German/English/French

Wing-span (mm): 3800
Flight weight approx. (g): 4700
Control: H,S,Q,M,WK
Length (mm): 1630
Manufacturer: Robbe
Fuselage: GFK
Wings: Styro/Abachi
Rec. engine: RO-POWER TORQUE 4226-570
Rec. Battery: 4-5S/4000-5000mAh LiXX
Version: ARF - ALMOST READY TO FLY
Airfoil: HQ 2.0/10
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

The CALIMA is the new thermal and all-round giant at Robbe. It has various attachable wing- and tiplets and is therefore easily variable in its wingspan. It can therefore be adapted to different conditions and requirements of the pilot. The pendulum elevator is simply held in place by magnets on the fuselage. The PNP version comes with pre-installed servos, electrical connectors and original Multilocks for wing protection.
The flight characteristics are extremely good-natured. The CALIMA can be used as a slow thermal glider or as an all-rounder to move a little faster.
The fully covered wings are constructed of a styro core, glass fibre layers, Abachi planking and a carbon fibre reinforced spar. The ratio of weight to strength has been optimally achieved.
The CALIMA is suitable for beginners as well as for advanced model pilots.

Features:
  • four-part, ready Oracover covered Styro/GfK/Abachi wing with steel wingjoiner
  • continuous sandwich beam (carbon-pine-carbon) for maximum bending stiffness
  • built-in digital Robbe servos with ball bearings and solid metal gearbox (PNP only)
  • ready wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
  • ready ironed rudder flaps with mounted rudder horns
  • lacquered FRP fuselage with built-in wooden frames and carbon reinforcements
  • powerful Ro-Power 3522 1100 K/V outrunner, optimized for 4S (PNP only)
  • large canopy for easy battery replacement
  • ready hinged rudder
  • prefabricated rudder linkage with articulated parts from German production
  • ready-cut servo shaft and linkage covers
  • anodised aluminium spinner with straight centre section (PNP only)
  • high-strength carbon fibre propeller 14x8" (PNP only)
  • modern, highly visible design


Das Produkt CALIMA ARF HOCHLEISTUNGSSEGLER MIT von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3800 sowie ein Gewicht von 4700. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 4-5S/4000-5000mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]