Skip to main content
innovative RC products
fast delivery
96 years Robbe

  • Model SCIROCCO S in full GRP/CFRP construction, in mold multicolor painted
  • CFK coving
  • small material
  • Assembly instructions in German/English/French


Wing-span (mm): 3750
Flight weight approx. (g): 3450
Control: H,S,Q,M,WK
Length (mm): 1710
Manufacturer: Robbe
Fuselage: Carbon/FiberGlass
Wings: Fiberglass/Carbon
Rec. engine: BL Outrunner
Rec. Battery: 4-5S/4000mAh LiXX
Version: ARF - ALMOST READY TO FLY
Airfoil: HN-354
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

The new Scirocco "S" is the slightly smaller and further developed version of our successful Scirocco model.
With its 3.75m wingspan it is a bit more compact and maneuverable, but is in no way inferior to its big brother. The Scirocco S is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application. Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 3.75m model is no problem thanks to the low basic speed and can be performed safely by the pilot alone.
But also during faster and tighter aerobatics the Scirocco S unfolds its true temperament and masters the figures.
Despite its electric design, it is also being used more and more often on slopes.
The elaborate shapely design allows excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.
The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed, reducing the build time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.

Features:
  • more compact wingspan
  • higher maneuverability
  • continuous ailerons/flaps (no more bar)
  • Installation of black interchangeable frames for the 6-pin connectors provided in mold
  • separation groove for multilock system in mold


Das Produkt SCIROCCO S 3,75M ARF (Petrol) VOLL-GFK von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3750 sowie ein Gewicht von 3450. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 4-5S/4000mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport SCIROCCO S 3,75M ARF (Petrol) FULL-GRP HIGH PERFORMANCE GLIDER WITH 4 FLAP WINGS

Product number: 2668

€1,099.99*

Product has been ordered but unknown delivery date.

Privacy

  • Model SCIROCCO S in full GRP/CFRP construction, in mold multicolor painted
  • CFK coving
  • small material
  • Assembly instructions in German/English/French


Wing-span (mm): 3750
Flight weight approx. (g): 3450
Control: H,S,Q,M,WK
Length (mm): 1710
Manufacturer: Robbe
Fuselage: Carbon/FiberGlass
Wings: Fiberglass/Carbon
Rec. engine: BL Outrunner
Rec. Battery: 4-5S/4000mAh LiXX
Version: ARF - ALMOST READY TO FLY
Airfoil: HN-354
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

The new Scirocco "S" is the slightly smaller and further developed version of our successful Scirocco model.
With its 3.75m wingspan it is a bit more compact and maneuverable, but is in no way inferior to its big brother. The Scirocco S is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application. Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 3.75m model is no problem thanks to the low basic speed and can be performed safely by the pilot alone.
But also during faster and tighter aerobatics the Scirocco S unfolds its true temperament and masters the figures.
Despite its electric design, it is also being used more and more often on slopes.
The elaborate shapely design allows excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.
The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed, reducing the build time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.

Features:
  • more compact wingspan
  • higher maneuverability
  • continuous ailerons/flaps (no more bar)
  • Installation of black interchangeable frames for the 6-pin connectors provided in mold
  • separation groove for multilock system in mold


Das Produkt SCIROCCO S 3,75M ARF (Petrol) VOLL-GFK von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 3750 sowie ein Gewicht von 3450. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 4-5S/4000mAh LiXX Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]