Robbe Modellsport Boo slope glider yellow ARF
Product number:
2700
Robbe Modellsport RO-POXY 5 MINUTES EPOXY RESIN ADHESIVE 200G PER 100G RESIN+HARDENER
Content: 0.2 kg (€96.00* / 1 kg)
€19.20*
Robbe Modellsport Fuselage holder type "S" up to approx. 25mm for F3K and similar models
€10.39*
€12.99*(20.02% saved)
- Modell BOO in ARF Bauweise, fertig bespannt
- GFK Rumpf mit Kabinenhaube in Carbon Optik
- Bauhelling
- Kleinmaterial für Ruderanlenkungen
- div. Schrauben und Muttern
- GFK Flächensteckung
- GFK Frästeile
- Dekorsatz
- Umfangreiche bebilderte Anleitung in Deutsch, Englisch und Französisch
| Wing-span (mm): | 800 |
|---|---|
| Flight weight approx. (g): | 170 |
| Control: | H,S,Q |
| Length (mm): | 485 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | GFK |
| Wings: | Wood/rib construction |
| Rec. Battery: | 2S/240-320mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Without |
BOO - Tiny Little Fun Slope Glider!
Thank you for choosing the micro fun glider with an 800 mm wingspan for slopes, dikes, or dunes. Small in size but designed for big fun. With its transport-friendly dimensions, it can even fit into your hand luggage on a plane or simply on the parcel shelf in your car. The model promises enjoyment in a compact package.
In addition to the well-known kit version of the Boo model, there is now an ARF version that is largely pre-assembled. The wooden construction remains the same as in the kit. Final assembly takes place on a building jig, allowing for precise alignment of all components. The wing is detachable, and the V-tail can be easily removed, making the model very transport-friendly.
Recommended RC Equipment: • 4-channel transmitter with dual-rate and expo
Required Tools: • Building board
The product Boo Slope Glider Gelb ARF in innovativer from Robbe Modellsport in the category Glider Models has a wingspan of 800 and a weight of . The model is controlled via the functions H,S,Q*. The Model is GFK .
* Explanation of control functions:
Thank you for choosing the micro fun glider with an 800 mm wingspan for slopes, dikes, or dunes. Small in size but designed for big fun. With its transport-friendly dimensions, it can even fit into your hand luggage on a plane or simply on the parcel shelf in your car. The model promises enjoyment in a compact package.
In addition to the well-known kit version of the Boo model, there is now an ARF version that is largely pre-assembled. The wooden construction remains the same as in the kit. Final assembly takes place on a building jig, allowing for precise alignment of all components. The wing is detachable, and the V-tail can be easily removed, making the model very transport-friendly.
Recommended RC Equipment: • 4-channel transmitter with dual-rate and expo
- Micro receiver with normal range (e.g., JETI R5L / Futaba R2106GF)
- Sub-micro servos, 8 mm thick, 4x DIGITAL HV Servo FS-135 X #9128
- Battery, LiPo 2S, 200 – 400 mAh, 7.4V, Robbe Ro-Power #7317 or #7313
Required Tools: • Building board
- Instant glue “Speed” (thin and medium viscosity) #5062 / 5063
- Activator spray #5017
- Glue stand #50610
- Epoxy glue, e.g., Ro-Poxy #50600
- Control throw gauge #50611
- M3 tap
- Various pliers and screwdrivers
The product Boo Slope Glider Gelb ARF in innovativer from Robbe Modellsport in the category Glider Models has a wingspan of 800 and a weight of . The model is controlled via the functions H,S,Q*. The Model is GFK .
* Explanation of control functions:
- H ... Elevator
- S ... Rudder
- Q ... Ailerons
- M ... Motor controlled
- V ... Vector controlled
- SK ... Airbrakes
- WK ... Flaps
- WZFW ... Retractable Landing Gear
- SKU ... Glider Tow
- ( ) ... optional - control functions written in brackets are optionally available for the described model
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]